Need Help? Call us at (281) 541-2807 Visit our Facebook Page Follow us on Twitter Subscribe to our RSS Feeds

Electrical Troubleshooting & Preventive Maintenance On-Site Training

presented by TPC Trainco
View the TPC Trainco Profile and Available Training

There may be public open-enrollment dates/locations for this class near you.

Summary

A 2-Day Hands-On Course for Building, Plant & Facility Maintenance. Day 1 - Electrical Circuits, Motors & Power Distribution. Day 2 - Power Quality, Lighting, PLC's & VFD's

Workshop Description/Agenda

Teaching students common-sense electrical troubleshooting techniques so they can keep their facilities and equipment up and running is the primary goal of this seminar. Learning how to protect themselves from serious injury while doing it is a vitally important bonus. Attendees in this course will not be playing with trainers built for a classroom but, instead, they’ll be working with real world industrial components found in their facility. They will be using CAT III industrial meters to troubleshoot – just as they should in their facility.

Course Competencies & Learning Objectives:

  • Interpret the OSHA requirements for troubleshooting and working on energized circuits
  • Determine the Personal Protective Equipment (PPE) requirements for electrical troubleshooting.
  • Safely and correctly verify a circuit is de-energized.
  • Perform basic circuit checks for shorts, opens and ground faults using a multimeter.
  • Read and interpret simple ladder and schematic diagrams.
  • Perform continuity and resistance checks on relay coils and contacts, overloads, fuses, circuit breakers, switches and other control circuit components.
  • Wire and troubleshoot basic electrical control circuits to develop a logical, systematic approach to troubleshooting.
  • Take clamp-on ammeter readings on 3-phase circuits and interpret readings.
  • Measure voltage on 3-phase Wye and Delta connected circuits and calculate percent phase imbalance as part of troubleshooting motors.
  • Test single-phase power distribution systems for correct wiring.
  • Use a Megohmmeter to perform the following insulation resistance tests used on motors and distribution systems: Spot Reading, Dielectric Absorption Ratio, Polarization Index.
  • Observe power quality problems and troubleshooting techniques for facility distribution systems, three-phase loads and commercial lighting.
  • Read and interpret basic PLC ladder diagrams.
  • Measure VFD output characteristics and observe VFD operation.
  • Be ready to read and interpret your facility one-line electrical drawings and electrical floor plans.
  • Identify components of a successful electrical preventive maintenance program.


Course Outline:

I. Basic Skills for Electrical Troubleshooting

  • A. Safety First
  • B. OSHA Requirements Regarding Troubleshooting and Qualified Persons
  • C. Using Electrical Drawings
  • D. Using Meters and Circuit Measurements
  • E. Developing a Logical, Systematic Approach to Troubleshooting

II. Troubleshooting Control Circuits

  • A. Relays, Motor Starters and Control Devices
  • B. Reading and Interpreting Ladder Diagrams
  • C. Power Loss
  • D. Control Circuit Industrial Applications
  • E. Electric Motor Drives
  • F. Solenoid-Operated Valves
  • G. Heating Elements

III. Troubleshooting Motors

  • A. Most Common Motor Problems
  • B. Electrical Problems
  • C. Testing Windings for Shorts, Opens and Ground Faults
  • D. Phase Unbalance
  • E. Mechanical Problems
  • F. Phase Rotation Testing
  • G. Troubleshooting Power Distribution
  • H. Wye and Delta Systems
  • I. Overcurrent Protection
  • J. Branch Circuits

IV. Troubleshooting Power Quality Problems

  • A. Sources of Power Quality Problems
  • B. Test Equipment for Troubleshooting Power Quality Problems
  • C. Harmonics

V. Troubleshooting Lighting Circuits

  • A. Lighting Terminology
  • B. Types of Lighting Circuits
  • C. Incandescent Lighting
  • D. Fluorescent Lighting
  • E. HID Lighting

VI. Troubleshooting Programmable Logic Controllers (PLCs)

  • A. Overview of Programmable Logic Controls
  • B. Reading PLC Ladder Diagrams
  • C. Status Indicators and Error Codes
  • D. Force and Disable
  • E. Startup Procedures

VII. Troubleshooting Variable Frequency Drives (VFDs)

  • A. VFD Terminology
  • B. VFD Basic Operation
  • C. Components
  • D. Pulse Width Modulation
  • E. Types of VFD
  • F. Common Problems and Corrective Action

VIII. Electrical Preventative Maintenance

  • A. Why Perform Electrical Maintenance
  • B. Overview of an Electrical Maintenance Program
  • C. Building Your Own Walkthrough Inspection Checklist

 
CEU value: 1.4

Length of Course Instruction: 14 hours

Who Should Attend

Whether your maintenance staff consists of new hires, engineers or anyone in between, this class can be tailored to meet your specific needs. This course is applicable for maintenance personnel working in manufacturing plants, commercial buildings, hospitals, schools, government buildings, waste water facilities, shopping centers, apartment buildings and related facilities.

Additional Information

Training Provider: TPC Trainco

Course Topics: Industrial Training > Electrical

Training Course Summary: A 2-Day Hands-On Course for Building, Plant & Facility Maintenance. Day 1 - Electrical Circuits, Motors & Power Distribution. Day 2 - Power Quality, Lighting, PLC's & VFD's

Private Group Training Request

For groups of 10 or more, consider bringing the training to you as a cost effective way to train your workforce. Fill out the following form and we will contact you right away.

 

Enter Your On-Site Training Requirements

 

Name:

Company:

Contact Number:

Email Address:

Your City:

Your State:

Expected Number of Attendees:

When To Hold the Class:

How Many Days of Instruction:
Briefly Describe Your Training Needs: